English English Spanish Spanish

Weather Insulating/Sealing

Weather Insulating/Sealing

 

Weatherizing, insulating and sealing are important parts of energy efficiency and conservation programs creating a market for green jobs. Various types of weatherizing, insulating and sealing products include blow-in and spray-on applications. These may require a certain amount of training in order to apply these materials to product specifications in order to achieve proper weatherization. The materials used in these types of applications can include, but are not limited to: for blow-in, fiberglass and cellulose; for spray-on, spray polyurethane foam (SPF), spray polystyrene, and spray latex sealant.

Jobs in the weatherization industry (either for new homes and commercial/public buildings or retrofitting old homes and commercial/public buildings) have increased significantly over the past 10 years. Weatherization jobs include work-related activities from direct installation of weatherization and insulation materials (applicators) to assisting applicators with installation of weatherization materials to cleanup.

All weatherization applications and materials have some benefits. All weatherization applications and materials have some hazards. The hazard information and solutions common to all these applications and materials include: confined spaces, falls, electrical, medical and first aid, ventilation, proper personal protective equipment and respiratory protection. Unique hazards are outlined in the sections below under the individual materials.

Hazards and Solutions

Workers in the Weather Insulating/Sealing industry are exposed to typical workplace hazards, including the following.

In weatherization/insulation, workers can be exposed to the hazards that have been identified below:

Fiberglass

Fiberglass has been used as insulation for many years. The main concerns with use of fiberglass insulation are skin, eye, and respiratory tract irritation. Long-sleeved shirts and long-legged pants, gloves, and head coverings are generally recommended to protect against skin irritation when working with fiberglass insulation. In some cases, eye protection and respiratory protection may also be necessary. Additional information on safe handling of fiberglass products is available from the North American Insulation Manufacturers Association.

Cellulose

Cellulose is the oldest known building insulating material. Dry cellulose can be used in retrofitting old buildings by blowing the cellulose into the wall cavity using boar holes drilled at the top of the walls. Either dry cellulose or wet cellulose applications can be used in new building construction. Cellulose is a respiratory irritant (NTP, 2006). Employers should provide workers with the appropriate dust respirators when using this type of insulation material (NTP, 2006; 29 CFR 1910.1000 Subpart Z; 29 CFR 1926.55 Appendix A).

Unless treated with fire-retardants cellulose can be flammable, and should not be used around open flames (Philpot, 1970).

Spray Polyurethane Foam

Spray Polyurethane Foam (SPF) is used as an insulating material in new construction and when retrofitting older buildings. Employers need to ensure that SPF application is carried out in a safe manner to protect workers. SPF contains Isocyanates, which have been reported to be the leading attributable chemical cause of work-related asthma (WRA) (NIOSH, 2004).

OSHA has identified these unique hazards associated with SPF:

Polystyrene

Polystyrene is used as a spray-on application similar to SPF installations. Styrene may be generated during the installation process. Styrene has been shown to cause several health effects when inhaled. These include respiratory irritation, and neurological effects. Employers need to provide adequate respiratory protection and protective equipment similar to SPF installation when using this spray-on application (29 CFR 1910.1000 Subpart Z; 29 CFR 1926.55 Appendix A – Air contaminants; EPA IRIS).

Styrene is also flammable and the same controls as outlined for SPF should be used (29 CFR 1910.106 – Flammable and combustible liquids).

OSHA has identified these unique hazards associated with Polystyrene/styrene:

Latex Sealant

Latex sealant is generally used with fiberglass batting in order to provide a better seal. Because latex is a known sensitizer it can cause allergic skin and respiratory reactions in some individuals. Employers need to provide workers with proper protective equipment and respiratory protection when using this type of product to avoid unnecessary skin, eye, and respiratory exposure.

Fatalities and Incidents

OSHA has identified several fatalities and incidents due to severe asthmatic attacks and fire/explosions associated with the use of isocyanate-containing materials.

A 41-year old Springfield, Massachusetts worker was killed when the spray foam chemicals he was spraying in a home attic caught fire. A worker for a Vermont insulation company ran a hose from two 50-gallon drums of chemicals outside the house into the attic where he was applying the insulator. It is believed that the vapors of the spray chemicals then ignited and engulfed the attic. After smelling smoke, two coworkers rushed upstairs to remove the worker, but couldn’t because the flames and smoke were too intense. Firefighters were unable to reach the man by placing a ladder on the porch roof. After breaking into the side window to the attic, firefighters pulled the man’s unconscious body out of the house and performed CPR. The efforts were unsuccessful. The worker was pronounced dead at Springfield hospital that night (Cape Cod Times, May 2008).

A maintenance worker repairing a foaming system at a polyurethane foam manufacturing plant developed respiratory symptoms associated with isocyanate exposure. Detectable MDI concentrations were discovered in the workplace. There was no effective ventilation and dermal protection while investigations revealed aerosols and vapors near the faces of the workers. The worker quit his job after being diagnosed with isocyanate-induced hypersensitivity pneumonitis. Years after leaving the plant, he continued to experience symptoms including cough, weakness, sweats, muscle aches, shortness of breath and loss of lung function. The illness worsened over time, and eventually led to his death (NIOSH 1996).

A 45-year-old worker had a fatal asthma attack after spraying an MDI-based bed liner onto a vehicle interior. The worker was wearing a half mask, supplied-air respirator, latex gloves and coveralls. The room had two curtains pulled together to contain the spray, a fan at the door to provide air circulation and no local exhaust ventilation. After disconnecting the respirator and leaving the room, the worker began developing acute respiratory symptoms. He was taken to the hospital where he then went into cardiac arrest. The county medical examiner stated that the worker had died of an “acute asthmatic reaction due to inhalation of chemicals.” The health and work history of the patient suggests that MDI sensitization played a significant part in the fatality (NIOSH, 2006).

Public school officials at a large metropolitan school district became suspicious after several staff members developed asthma symptoms. NIOSH investigators were called in to inspect the school and discovered several recent isocyanate foam and coating material applications. The staff reported odors from the materials when they were being applied. Air sampling tests indicated release of isocyanates and potential for exposure (NIOSH, 2006).

a
Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt.

Support

Lorem ipsum dolor sit amet, consectetur adipisicing elit sed do eiusmod tempor